Q1: What is limited distance of X5 Remote Controller?
A1: Effective distance depends on your actual flight. The maximum measured distance of X5 is 500 m. But considering the safety of flight, we limit height and flight distance in factory setting. Initial height limit is 300 m and distance limit is 200 m.
Q2: Can I replace the original camera and with my own camera?
A2: Users can replace sports camera of X5. But the size of your camera must match with the original camera. After installing your own camera, you need to refer WIFI connecting steps in this manual, match and connect your camera ad WIFI to realize better image transmission. Moreover, you need to download camera APP for image transmission.
Q3: Aircraft shakes too much during flight.
Q3: Please stop flying, check whether motor base and propellers are balanced.
Q4: Aircraft cannot set height, or deviation is too big, or aircraft does not fly straightly while pulling sticks.
A4: Calibrate magnetic compass, check whether gravity center offsets, offset GPS against the direction toward which aircraft nose offsets in straight line flight.
Q5: How long can X5 aircraft usually fly?
A5: It depends on your flight. Smart battery can continuously be used for about 18 min when it is fully charged. If 2-grade low-battery alarm appears during flight, users must return home immediately.
Q6: What should I do if drone cannot maintain height ,descend slowly and the throttle responds slowly?
A6: Check whether aircraft and motor are overloaded; whether battery power is enough; whether drone shakes too much, check whether motor and propellers are balanced.
Q7: How can I land drone smoothly and successfully?
A7: Make the drone hover over stably, slowly handle sticks and land it.
Q8: Why aircraft offsets toward one direction?
A8: Check whether motor balance and GPS are above 7 stars.
Q9: When aircraft is placed on flat ground, its height in APP is changing, why is that?
A9: Barometer has temperature drift, height change is normal. After flight control is unlocked and oil push exceeds 20%, barometer will automatically reset to 0.
Q10: Why is charging and discharging time of new battery not zero?
A10: Charging and discharging test is conducted on battery before it leaves factory, please do not worry about this.